Supported Actions

The following actions are supported:

PTZ Actions

In addition to the corresponding actions for pan, tilt and zoom, the following actions are also supported:

Name	Description
AutoFocusOff	Deactivate autofocus
AutoFocusOn	Activate autofocus
FocusFar FocusNear FocusStop	If autofocus has been deactivated using AutoFocusOff, manual control of the focus is possible using these actions.
Camera Manual Iris Off	Switch iris to automatic
Camera Manual Iris On	Switch iris to manual control
Iris Open and Iris Close	If the camera is in Manual Iris mode, you can control the iris using these commands.
Move to default position Move to preset position Save default position Save default position Clear default position Clear present position	The corresponding action is performed.
Camera Tour Start Camera Tour Stop	The guard tour G0 set in the camera is started and stopped.

Control or Light Source such as LED

Name	Description
Camera Light On Camera Light Off	Here it is possible to turn on or off a light source on some camera types, such as the LED of M1054.

Name

Description

Camera Light On

Camera Light Off

Here it is possible to turn on or off a light source on some camera types, such as the LED of M1054.

Backlight Compensation

Name	Description
Camera Spec Func X Off Camera Spec Func X On	Here you can control the backlight compensation function of a camera, if this function is available.

Name

Description

Camera Spec Func X Off

Camera Spec Func X On

Here you can control the backlight compensation function of a camera, if this function is available.

Day-Light

Name	Description
"Camera Spec Func Y Off" "Camera Spec Func Y On"	Here the IR Cut Filter of the camera can be controlled. This feature is intended for type P1346, for instance.
Camera Day Night Mode	With this action, you can change the camera to the corresponding mode at any time. The available modes are Day, Night or Automatic, which means switching is performed automatically by the camera. This feature is intended for type P5534, for instance.

Name

Description

"Camera Spec Func Y Off"

"Camera Spec Func Y On"

Here the IR Cut Filter of the camera can be controlled. This feature is intended for type P1346, for instance.

Camera Day Night Mode

With this action, you can change the camera to the corresponding mode at any time. The available modes are Day, Night or Automatic, which means switching is performed automatically by the camera. This feature is intended for type P5534, for instance.

Camera Raw

Name	Description
Camera Raw Output	Using the Camera Raw Output action, it is possible to send any command to the camera at any time. This also makes it possible to set values in the camera that were not previously set. For further information or if you require this feature, please contact customer service.

Digital Inputs and Outputs

Name	Description
Digital inputs and outputs	To control the digital output of the camera, use the action Set Digital Output with appropriate values. If the plugin has identified a status change for the digital input of the camera, the Digital Input action can be seen in the G-Core server.